Is the plastic laser welding machine able to weld all plastics?-欧威激光科技（苏州）有限公司

Is the plastic laser welding machine able to weld all plastics? 发布时间：2024-10-16 00:00:00

Laser plastic welding technology is currently mainly used in automotive, electronics, medical equipment and other industries, we can make a simple summary of the applicable material type of plastic laser welding machine. In general, the following plastic materials are common welding objects:

1. Polypropylene (PP): Polypropylene is a commonly used engineering plastic with high heat resistance and chemical stability. Due to its low melting point, it is suitable for welding with laser welding machines.

2. Polycarbonate (PC): Polycarbonate is a high-performance engineering plastic with high strength and transparency. Due to its higher melting point, higher laser power is usually required for welding.

3. Polyamide (PA): Polyamide is a polymer material with excellent mechanical properties and wear resistance. Although its melting point is high, effective welding can still be achieved by adjusting the laser parameters.

4. Polystyrene (PS): Polystyrene is a common foam, with good thermal insulation properties and mechanical properties. Due to its low melting point, it is suitable for welding with laser welding machines.

5. Polyethylene (PE): polyethylene is a widely used plastic material with good corrosion resistance and wear resistance. Due to its low melting point, it is usually necessary to use lower laser power for welding.

In addition to the above common plastic materials, there are some special types of plastics can also be welded using plastic laser welding technology, such as fluorine plastics, special rubber and so on. It should be noted that different plastic materials may need to adjust the laser parameters to obtain the ideal welding effect.